TYGRIS Cutting & Tapping Fluid 400 ml

TYGRIS Cutting & Tapping Fluid is a ready to use specially formulated fluid to improve tool performance and extend tool life. It contains additives to prevent pitting, galling and metal seizure and is suitable for use on hard to work metals including stainless steel, titanium, aluminium and tool steel.

Benefits:

For cutting and tapping - reaming and turning;
Extreme pressure additives for difficult materials;
High pressure foaming discharge to aid penetration;
Prolongs tool life and improves machined finish;
Reduces heat build up;
Suitable for use on all metals;
Incorporates corrosion inhibitors

Consult the safety data sheet prior to use - suitable Personal Protection Equipment should be worn. Shake can well before use. Spray tool area to be treated. Repeat if necessary. Do not spray onto very hot surfaces or near naked flames. Dispose of used aerosols in line with local and national regulations.

*Image for illustrative purposes only

Appearance: Brown, frothy liquid-viscosity 300cPs
Odour: Sweet solvent odour
Contents: Blend of naphthenic lubricants, petroleum wax, bitumens, polyisobutylenes, minor quantities of xylene and white spirit, viscosity improvers, extreme pressure additives, corrosion inhibitors and hydrocarbon propellants. Non-chlorinated
Flash point: <0c
Solubility: Insoluble in water
Temperature range: For use at ambient temperatures
Relative density: 0.840
Flammability: Extremely flammable
Storage: Below 50c