PROTEAN Belt Dressing 400 ml

PROTEAN Belt Dressing is an NSF: H1 registered, spray-formulated, food grade belt dressing lubricant used to reduce slippage and extend the life of drive belts, increasing transmitted power and improving efficiency and economy. Suitable for use within Food & Beverage, Packaging, Pharmaceutical and other clean room environments.

Benefits:

High tack for maximum power transmission;
Reduces belt slippage for less squeal;
Decreases energy costs;
Does not reduce tensile strength;
Effective in damp conditions;
Extends belt life;
Temperature range: -50°C to +150°C;
360° valve for inverted use;

Consult the safety data sheet prior to use - suitable Personal Protection Equipment should be worn. Store out of direct sunlight and below +50°C (ideally between +10°C and +25°C). Shake aerosol well before use. Good ventilation is required at all times when using this product. For best results, apply a thin film directly onto the drive face of the belt. To ensure compatibility, always test a small amount of the product first on the belt / target surface. Dispose of used aerosols in line with local and national regulations.

*Image for illustrative purposes only

NSF Certificate No: 139265

Appearance: Virtually clear

Odour: Slightly sweet oily odour

Propellant(s): Propane/butane

Flammability: Extremely flammable aerosol

Contents: Blend of oils, propan-2-ol and propane/butane/isobutane propellant

Storage: Below 50?C

Flash Point: -60?C

Relative Density: 0.75

Category: H1 registered (lubricant with incidental food contact, for use in and around food processing areas)